Argus A2 Instruções de Operação descarregar pdf (Página 12)

● Staircase timer

The staircase timer or cycle time can be parametrised

via a time base x factor. With "Normal operation" and

"Master mode" operating modes the "Staircase timer"

is parametrised. With "Slave mode" and "Monitoring

mode" operating modes the "Cycle time" is

parametrised.

The "Times" tab has some parameter displays

and selectable objects which are dependent on

the operating mode set.

Note:

In "Slave mode" and "Monitoring mode"

operating modes no further objects are

displayed by modification on the "Times" tab.

Self-adjusting staircase timer

The movementmovement detector is equipped with a

"Self-adjusting staircase timer". When the "Self-

adjusting staircase timer" is enabled, the movement

detector can start a brief overshoot time when

someone is in the room for a short time. If they remain

in the room longer, a long overshoot time is started.

The parameters "Time base", "Minimum time factor",

"Time factor for learning step", "Maximum time factor"

and "Sensitivity of the learning step" are available for

the "Self-adjusting staircase timer." If there is only a

brief movement in front of the movement detector,

the overshoot time (until switch-off) will be close to the

"Minimum time factor" x "Time basis". If movements

last longer, a "Time factor for learning step" will be

added to the staircase timer up to the maximum,

depending on what learning sensitivity has been set.

Once the time set on the staircase timer has elapsed,

a restart takes place with "Minimum time factor".

Communication objects

Operating mode: Normal operation

You can select the following communication objects:

Block X, general times:

Parameter

Operating mode: Normal operation

Note:

The parameter settings include various

functions which depend on other functions.

Depending on the parameter setting, some

functions or objects may or may not be

displayed in the ETS.

Communication objects

Operating mode: Master mode

You can select the following communication objects:

Block X, general times:

Parameter

Operating mode: Master mode

Note:

The parameter settings include various

functions which depend on other functions.

Function Object name Type Prio Flags Behaviour

Block X Time factor,

staircase timer

1 byte Low WC Transmit

Block X, general times

Parameter Setting

Via movement, time is Retriggerable

Not retriggerable

Staircase timer adjustable via Parameters

Potentiometer

Overwriting staircase timer

during download

Enabled

Disabled

Self-adjusting staircase timer

(always retriggerable)

Disabled

Enabled

The following settings are only

visible when "Self-adjusting

staircase timer" is "disabled".

Time factor staircase timer object Disabled

Enabled

Time base, staircase timer 1 min

1 s

1 hr

Time factor for staircase timer (1 -

255)

1 - 255; preconfiguration: 25

The following settings are only

visible when "Self-adjusting

staircase timer" is "enabled".

Minimum time factor (1 - 255)

Staircase timer

1 - 255; preconfiguration: 5

Time factor for learning step (1 -

255) Staircase timer

1 - 255; preconfiguration: 1

Maximum time factor (1 - 255)

Staircase timer

1 - 255; preconfiguration: 25

Sensitivity of learning step 1 - 5; preconfiguration: 4

1 = slow

5 = sensitive

Function Object name Type Prio Flags Behaviour

Block X Master trigger

object

1 bit Low WC Transmit

Block X Trigger object 1 bit Low WC Transmit

Block X Time factor,

staircase timer

1 byte Low WC Transmit

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Argus A2 Instruções de Operação Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras bridge Argus A2