Argus A2 Instruções de Operação descarregar pdf (Página 15)

● Master/slave planning via the trigger object or

master trigger object

General information regarding the trigger object

and master trigger object

The trigger object acts on the staircase timer without

brightness measurement. Object value "1" starts the

staircase timer (start of movement action) while

further "1" telegrams retrigger the staircase timer, if

enabled.

Object value "0" can switch the staircase timer off (end

of movement time action), if enabled.

The master trigger object acts on the staircase timer

with brightness measurement. Object value "1" starts

the staircase timer (start of movement action) while

further "1" telegrams retrigger the staircase timer, if

enabled.

Object value "0" has no meaning as regards the master

trigger object.

The parameters "Trigger object observes the safety

pause" (enabled/disabled) and "Master trigger object

observes the safety pause" (enabled/disabled)

determine the effect of the safety pause on the two

external trigger objects.

Application example 1:

Slave as movement detector (not brightness-

dependent) and master as movement detector

(not brightness-dependent)

– System not brightness-dependent

– Slave transmits ON telegrams cyclically after

movement

– Master switches on actuator when movement

detected or trigger

– Master retriggers staircase timer when movement

detected or trigger

– Master switches off when staircase timer elapses

– Cycle time slave maximum staircase timer / 2

– Staircase timer retriggerable via movement / master

trigger / trigger

Application example 2:

Slave as movement detector (not brightness-

dependent) and master as movement detector

(brightness-dependent)

– Master evaluates brightness locally

– Slave transmits ON telegrams cyclically after

movement

– Master switches on actuator upon movement

detection or master trigger if it is too dark

– Master retriggers staircase timer upon movement

detection or trigger, if previously switched on

– Master switches off when staircase timer elapses

– Cycle time slave maximum staircase timer / 2

– Staircase timer retriggerable via movement / master

trigger / trigger

Application example 3:

Slave as movement detector (brightness-

dependent) and master as movement detector

(brightness-dependent)

– Master and slave evaluate the brightness

– Slave sends ON telegrams cyclically upon

movement detection if it is too dark or "Always-dark

object" is "1".

– Master switches on actuator upon movement

detection, if it is too dark

– Master switches on actuator upon trigger

– Master retriggers staircase timer upon movement

detection or trigger, if previously switched on

– Master switches off when staircase timer elapses

(always-dark object again "0")

Block X, general movement

sensors

Parameter Setting

Range object (for all sensors) Disabled

Enabled

Block X, general brightness

Parameter Setting

Brightness threshold object Disabled

Enabled

Switch actuator

Switch obj.

Status feedback obj.

1 to n slaves

Movement slave

Not

brightness-dep.

Movement master

Not

brightness-dep.

Trigger obj.

or master

trigger obj.

Switch actuator

Switch object

Master trig. obj.

Switch obj.

Status feedback obj.

1 to n slaves

Movement slave

Not

brightness-dep.

Movement master

Brightness-dep.

Switch actuator

Switch obj.

Trigger obj.

Switch obj.

Status feedback obj.

1 to n slaves

Always-

dark

obj.

Movement slave

Brightness-dep.

Movement master

Brightness-dep.

1 2 ... 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Argus A2 Instruções de Operação Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras bridge Argus A2